CONTACT INFORMATION

EPG Commander

U.S. Army Electronic Proving Ground
ATTN: TEEP-CO
2000 Arizona Street
Fort Huachuca, AZ 85613-7063
Comm: (520) 538-8888 DSN 879

Customer Support

U.S. Army Electronic Proving Ground New and Current Customer Support
Comm: (520) 533-8204 DSN 821
Email: USARMY Ft Huachuca ATEC List EPG Customer Support

EPG Protocol Officer

Comm: (520) 538-2382 DSN 879
Email: EPG Protocol Officer

Instrumentation

EPG Instrumentation Help Desk
Support: Please contact the Instrumentation Help Desk via email
Email: usarmy.huachuca.atec.list.epg-instrumentation-help-desk@army.mil

Webmaster

Email: usarmy.huachuca.atec.list.epg-sharepoint@army.mil


Back to Top

Visitor Information

It is Command policy that all visitors to the Electronic Proving Ground report to the Visitor Control Center (Building 56303) located at the entrance to Banister Hall (Building 56301) for visit validation, badge pickup and registration prior to visiting any of our administrative facilities, test facilities or range areas.


Fort Huachuca entrance gate hours of operation:
  • Van Deman Gate: 0530 - 1930 (Monday through Friday), 0800 - 2000 (Saturday & Sunday); Closed on federal holidays
  • Buffalo Soldier Gate: 24/7

EPG Visitor Control

  • Location: Bldg. 56303, Arizona Street, Fort Huachuca
  • Hours of operation: 0630-1600
  • Visitor Control:
    • 520-538-4020 DSN 879

Visit Requests, Security Clearance and Special Access

  • Visit requests are MANDATORY for everyone
  • Visit requests may be sent via the Defense Information System for Security (DISS) or facsimile
  • Facsimile visit request information to 520-533-8268 (DSN 821-8268)
  • The following information is required:
    • Full Name, military rank, US government civilian grade and or a position title
    • SSN
    • Citizenship
    • Investigation type and date completed
    • Clearance, date granted and granting authority
    • Date and Place of Birth
    • Inclusive dates of visit; if recurring, we recommend you PERMCERT for 1 year
    • Name and telephone number of EPG employee to be visited; not the EPG security office
    • Purpose of Visit. Be specific; name the test, conference, meeting, etc.
    • Your request must indicate signatory verification by a Security Officer who oversees your security clearance status
    • Note 2: If an investigation is past the expiration date, please include the date of periodic reinvestigation submission.
    • Note 3: Do not provide any special accesses held within the Special Security Office (SSO) system (see below).
  • Allow a minimum of one hour after sending a facsimile for processing time; then call the EPG Visitor Center at 520-538-4020 to confirm receipt.
  • DISS-transmitted collateral clearance visit requests should be sent to SMO code: W04YAA.
  • Visits which require Special Access are verified through the DISS. If your information is as yet not held in the DISS, it may be sent through the SSO communications system to SSO EPG (DISS SMO code: W04YAA3). Please certify for one year (PERMCERT).
    • Note 4: In addition to sending clearance or access requests through the SSO system, a collateral visit request must also be sent to the EPG Security Office.

Foreign Visit Requests

  • All requests for official Government-to-Government visits by foreign personnel are conducted through established Embassy protocols.
  • Foreign commercial contacts, please refer questions and coordination through the USAEPG Foreign Disclosure Officer, 520-538-3534 DSN 879.

Points of Contact for Security & Intelligence


  • Chief, USAEPG Security
    • 520-538-3534 DSN 879
  • Special Security Officer (SSO), SCIF Manager
    • 520-533-8982 DSN 821
  • Special Security Representative (SSR)
    • 520-533-8201 DSN 821
  • Personnel Security Officer, Information Security
    • 520-538-1420 DSN 879
  • Physical Security Officer
    • 520-533-8031 DSN 821
  • COMSEC, CCI Manager
    • 520-533-8293 DSN 821
  • Emergency Management, OPSEC, Antiterrorism (Force Protection) Officer
    • 520-538-4895 DSN 879
Back to Top

Directions

Tucson International Airport to Sierra Vista
From the Airport exit, follow Country Club Dr to Valencia Rd. Turn right on Valencia Rd. Continue on Valencia to the I-10 East entrance (toward El Paso). Drive approximately 40 miles on I-10 to exit 302. Turn south on Hwy 90. Drive approximately 30 miles to Fort Huachuca and Sierra Vista.

Fort Huachuca Van Deman Gate to EPG
From the guard checkpoint, drive approximately 0.3 miles to the first traffic light (Hunt Ave). Turn right on Hunt Ave. Drive to the intersection of Hunt Ave and Arizona Street. Both EPG HQ (Banister Hall, Bldg 56301) and the EMETF (Bldg 55350) are located at this intersection.

Fort Huachuca Buffalo Soldier Gate to EPG
From the guard checkpoint, continue on Squire Rd. Turn right onto Irwin Ave. Turn right onto Hatfield St. Turn left onto Hunt Ave (traffic light). Drive to the intersection of Hunt Ave and Arizona Street. Both EPG HQ (Banister Hall, Bldg 56301) and the EMETF (Bldg 55350) are located at this intersection.

Area Maps

Lodging Info

Notice: The appearance of external hyperlinks does not constitute endorsement by the U.S. Army of this Web site or the information, products, or services contained therein. For other than authorized activities such as military exchanges and MWR sites, the U.S. Army does not exercise any editorial control over the information you may find at these locations. Such links are provided consistent with the stated purpose of this Web site.

IHG Army Hotel (520) 458-9066 https://www.ihg.com/armyhotels/hotels/us/en/reservation



Privacy Act Statement