FA Soldiers test new precision targeting system to
find friend or foe on battlefield
by Staff Sgt. Timothy Phillips, Test NCO, Fire
Support Test Directorate, U.S. Army Operational Test Command Public
Affairs
Pfc. Anthony Greenwood (left) finds a target in his area using the Joint
Effects Targeting System Target Laser Designation System (JETS TLDS),
while Pfc. Montiel of utilizes Precision Fires-Dismounted (PF-D) to send
a fire mission to higher headquarters. Both Soldiers are from Battery D,
2nd Battalion, 8th Field Artillery Regiment, taking part in an
operational test of JETS TLDS at the Fox Den Observation Post in the
Texas Training Area at the Cold Regions Test Center, Fort Greely. (Photo
Credit: Scott D. McClellan, Fire Support Test Directorate, U.S. Army
Operational Test Command Public Affairs)
Spc. Tyler Carlson of Battery D, 2nd
Battalion, 377th Parachute Field Artillery Regiment, gets ready to scan
his sector for targets using the Joint Effects Targeting System Target
Laser Designation System (JETS TLDS) on the Fox Den Observation Post in
the Texas Training Area during operational testing at the Cold Regions
Test Center, Fort Greely, Alaska.(Photo by Scott D.
McClellan, Fire Support Test Directorate, U.S. Army Operational Test
Command Public Affairs)
FORT GREELY, Alaska -- Twenty Field
Artillery Soldiers are testing the Joint Effects
Targeting System Target Laser Designation System
(JETS-TLDS) at the Cold Regions Test Center here.
The JETS-TLDS is a modular advanced sensor suite of
three components: the hand-held target location module
(HTLM), precision azimuth and vertical angle module
(PAVAM), and laser marker module (LMM).
Soldiers from Battery D, 2nd Battalion, 8th Field
Artillery, stationed at Fort Wainwright, Alaska, and
Battery D, 2nd Battalion, 377 Parachute Field Artillery
Regiment, stationed at Anchorage, Alaska, are teaming up
in a rigorous operational test on this new precision
targeting device in the rugged Alaska terrain.
The teams used the system in a wide spectrum of
operations. They used the infrared imager (IRI) and
color day imager (CDI) to detect, recognize, and
identify vehicles and personnel at various distances to
determine whether they are friend or foe.
They also used the system in a simulated urban
environment, where the Soldiers cleared multiple
buildings and occupied rooftops and rooms to observe
opposing forces in the city.
"Since the system is smaller you don't have to worry
about bumping it around when clearing a building," said
Sgt. Nicholas Apperson of Battery D, 2-377 PFAR. "If you
have to switch buildings, disassembling and reassembling
the system is much quicker than other targeting
devices."
When it came time to use the LMM to mark targets for a
live-fire with an AH-64 Apache from 1st Battalion, 25th
Infantry Division Attack Reconnaissance Battalion, all
of the test unit Soldiers volunteered at once.
Unfortunately, there was only enough ammo to have four
teams participate.
"With the push that the Army is making for all Fire
Support Specialists to become Joint Fires Observers
(JFO), the LMM provides a tool at the platoon level that
allows us to designate and mark targets for aircraft,"
said Pfc. Anthony Greenwood of Battery D, 2-8 FA.
"Its light weight makes it easy to take it out on a
mission and utilize it to its fullest capability."
During the last three weeks of the test, all 10 teams
exercised the system's ability to determine target
location.
Soldiers were set at randomized objective rally points
(ORPs) ranging from 500 meters to 2 kilometers from
their observation posts (OPs). They then conducted a
tactical movement from ORP to OP.
After occupying their individual OPs, they would find
targets all around them and determine exactly where they
were at using the JETS TLDS.
The Soldiers would then use the Precision
Fires-Dismounted (PF-D), which is an application used on
NET Warrior by fire supporters to digitally transmit
fire missions, develop a fire mission, and send it to
a simulated company fire support team (FIST).
On average, they sent 40 fire missions each 10-hour day.
"The JETS system is definitely much lighter and a lot
easier to pick up and learn all the functions quickly,"
said Staff Sgt. Christopher McKoy of Battery D, 2-8 FA.
"It is so simple that you can pick it up and learn it in
five minutes."
Other real-world training was forward observers
conducting movement with a maneuver unit. Here, they
would walk a ridge line and receive simulated
intelligence reports of enemy targets at certain points
along their route. After receiving the reports, the
teams would be forced to establish a hasty OP and
acquire targets quickly.
After spending a month with the targeting systems, most
Soldiers were ready for the system to be fielded.
"This system is definitely a major jump from what
forward observers are used to and makes our job much
more efficient," said Spc. Tyler Carlson of Battery D,
2-377 PFAR.
"I believe that this system would be an effective tool
to detect and acquire targets of opportunity in many of
the theaters that we are fighting in today," McKoy said.
~~
About the U.S. Army Operational Test Command:
As the Army's only independent operational tester,
USAOTC tests Army, joint, and multi-service warfighting
systems in realistic operational environments, using
representative Soldiers to determine whether a system is
effective, suitable, and survivable. Public law requires
USAOTC to test major systems before they are fielded to
its ultimate customer, the American Soldier.